USER MANUAL · 4K VERTEX · REV 1.30

4K Vertex Total Control APP 1.0.0 for Android and iOS

The Total Control Bluetooth app for Android and iOS and the Vertex settings it can control.

MANUAL CONTENTSManual p.54–55DOWNLOAD PDF (REV 1.30)

ALL CHAPTERS

4K Vertex Total Control app on Android showing GoBlue and firmware version, source info and RX/TX signal details

Main Features of the Android/iOS Total Control APP for Vertex

This APP request Bluetooth authorization and SD card/file writing permissions when installing.

The app will allow you to control and operate your HDfury Vertex and CEC components within your Home Theater setup. It can perform the following:

Reset/HPD/Read/Modify and Upload Configuration.
Switch Input channel and Matrix/Splitter mode.
Set Auto switching mode.
Set Input Priority mode.
Turn Logo LED and OLED ON/OFF. Set OLED startup page
Set OLED fade timer, OLED rotation or OLED reverse color.
Define HDCP rules and fix HDCP error.
Set EDID mode (Automix, Custom, Copy Top, Copy Bot, Fixed)
Set Automix Algo with Min Mixed Capabilities, Max Audio/Min Video, Bot Output Priority, Top Output Priority, Max Audio/Max Video.
Set Automix enforceable video flags (BT2020, HDR10+, HDR HLG, Dolby Vision, 3D Remove, YCbCr)
Set Automix enforceable audio flags (2.0, 5.1, full, native)
Set the Custom EDID of your choice for Port 0 and 1 separately (choose from a list of 100 EDID)
Select the scaling type (Auto, Custom, none)
Define Auto Scaling for Port 1 from available presets.
Define Custom Scaling mode for Port 0 and 1 (Upscale or Downscale)
Set Mode, Colorspace and Deepcolor settings for any input types.
Disable HDR, AVI or VSI and replace current metadata and infoframe by a custom one.
Activate and configure OSD data, position, colors and transparency.
Activate and configure OSD Mask position, colors and transparency.
Activate and set OSD Text position, colors and transparency.
Set CEC device with Video Processor or Audio System with ARC.
Send live CEC command to the HDMI/CEC network.
Display current link speed and infoframe information.
Display incoming signal information and active link(s)
Display GUI, FW and GoBlue version in use.

Get the APP from Google Play Market: here. For iOS, get it from APPstore: here.

On Android, you can create your own menu and add custom commands at any time through an editable XML menu file. You can connect to Vertex and use the Bluetooth APP even when no signals is going through the Vertex

NoteDo not pair your phone to Vertex using Android BT Menu, just launch APP and it will autoconnect

GLOSSARY TERMS IN THIS CHAPTER

GoBlue & Total Control App