USER MANUAL · 4K VERTEX · REV 1.30

EDID Mode Selection – HDfury Vertex user manual

The three positions of the EDID slide switch: Automix, Custom Use / BT and the fixed L/R audio EDID.

MANUAL CONTENTSManual p.8DOWNLOAD PDF (REV 1.30)

ALL CHAPTERS

4K Vertex diagram of the EDID mode selection slide switch: EDID Automix Mode, Custom Use [GUI], 4K60 420 8b SDR Stereo

EDID slide switch has 3 positions.

Switch should be set to middle position to allow control via USB, IR, RS232 or Bluetooth device.

Automix Mode: Create EDID based on mutual sink capabilities controlled by a selectable algorithm with enforceable flags so both sinks will always show a picture and audio.
Custom Use / BT: Pick and use EDID from a selection of preloaded EDID tables (see p.14) or load any EDID bank of your choice. By default the selected EDID table is a 4K60 4:4:4 BT2020 HDR 600MHz with Full Audio capabilities. Leave the slide in this position to allow remote control via USB/IR/RS232 or Android/iOS APP and/or to pick and use any of the 100 different EDID tables available. Please note that Vertex can hold a specific EDID for each input.
Fixed EDID with L/R Audio: This mode is a 4K60 4:2:0 8b SDR 2channel stereo 300MHz basic table. It can be used as a security EDID to ensure a picture in mostly every setup/situation.

→ See: Custom EDID list (100 tables)

NoteYou can also switch EDID mode and any others control with IR codes, from the USB GUI for Windows PC, RS232 for MAC/WIN/Linux or via smartphone/tablet APP for Android/iOS using GoBlue.

→ See: Android / iOS app

GLOSSARY TERMS IN THIS CHAPTER

Fixed EDID