HDfury Vertex
USER MANUAL · 4K VERTEX · REV 1.30

Connecting Cables

How to connect the HDMI input and output cables, the power supply and optional audio and RS232 cables.

MANUAL CONTENTSManual p.5DOWNLOAD PDF (REV 1.30)
ALL CHAPTERS
GETTING STARTEDOverviewConnecting cablesPower / status OLEDReset HPD & factory defaultBackside stickerFRONT-PANEL CONTROLS & OLEDEDID mode selectionOLED / INFO controlInput switching & matrix modeHDCP settingsScaler settingsCombo RST + INPCombo INFO + INP (presets)OLED displayCustom EDID list (100 tables)SOFTWARE, UPDATES & CONTROLUSB driver (Windows)Firmware updateUSB GUI for WindowsRS232 controlAndroid / iOS appIR code listREFERENCEFAQHighlight featuresMain specificationsPro tipsCertifications
Cable connection diagram of the Vertex: HDMI output and optional second HDMI output, optical or analog audio output, 5V/2A power connector, HDMI input, optional second HDMI input and optional RS232

To use your 4K Vertex:

  • Connect a HDMI input cable to the HDMI input.
  • Connect a HDMI output cable to the HDMI output.
  • Connect the Vertex power supply.
  • Connect any additional HDMI input/output cable, RS232 or any audio output cable (optional).

HDMI/HDCP 1.x devices at output must be connected to TOP (Downscale) Output port. Make sure that you are using 600MHz certified HDMI 4K cable if you plan to set up a 4K60 4:4:4 8b or 4K60 4:2:2 12b 600MHz 18Gbps link in your setup.

GLOSSARY TERMS IN THIS CHAPTER
TX0 / TX1 (BOT and TOP outputs)

Source: official User Manual 4K Vertex, Rev 1.30. Text and figures © HDfury, reproduced for Vertex owners.

CD-R Nederland / HDfury · Postbus 274, 8070 AG Nunspeet · KvK 08073694 · VAT NL002139420B84