HDCP Control – HDfury Vertex glossary
HDCP is the content-protection handshake used between HDMI devices. Vertex provides supported interoperability tools for mixed-generation HDMI chains.
HDCP is a copy protection lock that HDMI devices use.
The source and the screen must first agree on the lock, called the handshake, before a protected film is shown.
The Vertex can change the lock type so older and newer devices can work together.
Can the HDfury Vertex fix HDCP problems between old and new devices?
YESYes. It decrypts each input and re-encrypts each output as HDCP 1.4 or 2.2, so 1.4 and 2.2 devices can work together. For HDCP 2.2 out, the manual says both outputs (p.11) but elsewhere only the TOP output (p.107).
How to use it with the Vertex:
- HDCP slide switch: 2.2 Mode, Auto/GUI (middle) or 1.4. Auto always outputs a working signal (p.11).
- In the GUI use CONFIG > HDCP VERSION to force the output level (p.41).
- RS232: #set hdcp 14 or 22; IR: vertex_hdcp14 / vertex_hdcp22 (p.49, p.77).
- Connect HDCP 1.x displays or receivers to the TOP output (p.5).
What it is
HDCP is the content-protection handshake used between HDMI devices. Vertex provides supported interoperability tools for mixed-generation HDMI chains.
Why it matters
HDMI behaviour is determined by the complete signal chain. Vertex exposes and manages these technical layers so mixed sources, displays, projectors and AV processors can be configured more deliberately instead of relying only on automatic handshakes.
Common questions
What do the three HDCP slide positions do?
HDCP 2.2 Mode always outputs 2.2 when the input is 2.2, HDCP 1.4 always outputs 1.4, and the middle Auto/GUI position picks a working version and allows GUI, IR and app control (p.11).
Where do I connect an older HDCP 1.4 device?
To the TOP output (p.5).